Toilet Water Shut Off Valve Leaking Uk

Disassemble the shutoff valve.

Toilet water shut off valve leaking uk.

You can do this by turning the valve by the toilet base clockwise. Here are the materials you need. Hopefully this is enough to compress the rubber gasket so that it is sealed on the valve stem to prevent water leaks. A toilet s shutoff valve operates only to stop the flow of water from entering the toilet if the toilet requires service.

Remove the old washer and slide on the new one. The rapid banging or jack hammering sound in a pipe during the fill process during. Within the toilet s shutoff valve are a number of seals. Place the small container underneath the valve in case some water leaks into it while you do the repairs.

Use light steady pressure so you don t damage the water lines. Wrap cloth or masking tape on the plier s jaws to protect the nut s finish. Next shut off the main water supply to the toilet and detach and drain the pipes using a wrench or pliers. Wrap the slip joint pliers jaws in masking tape to protect your shut off valve from any scratches caused by the sharp edges.

Water leak shut off valve fixing for a leaky toilet water shut off valve the easiest solution is to tighten the package nut 1 4 turn with a wrench. Step 3 remove the nut. Next remove the handle from the stem and then loosen and remove the packing nut. First shut off the water to the leaking water valve.

Because a toilet s shutoff valve is rarely turned off the seals within the valve tend to dry out and eventually crack. If your water supply valve is leaking you may not need to replace it. Tighten the packing nut on the toilet shutoff valve one eighth turn clockwise to try to seal a leak around the nut. Reinstall the packing nut tighten lightly with a wrench don t over tighten at this or any other point and reattach the handle.

When you re ready to get started shut off the water. How to replace a. The small plastic tub will catch the water from the pipes to avoid spillage. Then flush the toilet to empty the tank.

Do not remove the valve just tighten the packing nut. Then follow our step by step instructions on our article. There s an easy way to fix it and you may want to give it a try. A loud bang in your pipes after a fill valve shuts off.

Support see jane dri.