Standard Rough Opening For Sliding Closet Doors

Standard door rough openings.

Standard rough opening for sliding closet doors.

This allows for 1 2 inch thick drywall on both sides and at the top 80 inches for the doors and hardware and a 1 to 1 1 2 inch space under the door the space between the floor and the bottom of the door may vary depending on the type of flooring. Blending style and function they re great for closets pantries and home offices but because there s a small gap between the sliding barn door and the surrounding drywall they may not work well for bathrooms or other rooms where privacy is essential. You can adapt standard interior doors to use as sliding closet doors. Therefore the rough opening would be 82 1 2 tall by 38 1 2 wide.

These doors come in 24 28 30 32 and 36 inch widths. Bi fold doors work well in closets too. More rough opening tips. The diagonal measurements should be the same.

The 6 8 stands for 6 8 tall and the 3 0 stands for 3 0 wide. The rough opening should be 49 by 82 for a 48 by 80 inch door. These closet doors are not available as prehung units. Closet doors keep your storage boxes and hanging clothes out of sight.

Can fit the new door frame within the rough opening for the old door. The required size of the finished opening for a 48 by 80 inch door is 48 by 82 inches. It s common to have to add some shims for a. Sets of bifolds are available in a variety of widths in multiples of 2 inches and bypass doors can be cut to any width desired.

Barn doors make excellent closet doors because they don t take up functional space they simply slide parallel to the wall on a rail. The standard height is 80 inches the same. If you re going to frame a rough opening for a door then you ll need to know the unit size. A 6 foot wide closet opening is most common but you can install closet doors in an opening of just about any width.

Standard interior door jamb thickness on pre hung doors is 4 9 16 inches. Verify the rough opening is square. Verify the width and height of the door frame are each 1 2 smaller than the rough opening width height. The same goes for sliding closet doors.

Maximum allowable deviation from square is normally 1 4. You can use any interior door as a closet door. The standard height is 80 inches which you can trim to fit your.